Christof Schneiter | Güntensperger AG
Precision Tools | Switzerland
1 particular tool path was taking well over 5 hours. When reprogramming with VoluMill I got it down to 48 minutes. So far after reprocessing only 2 parts I have saved 21 hours 51 minutes. I am a big fan of VoluMill and would highly recommend to any.
Wayne Erman | Lord
Aerospace | Dayton Ohio
I had previous experience with volumill in the past. I recently convinced management to invest in the volumill add on for Siemens NX for a 17-4 heat treated application. the software performed flawlessly and reduced the estimated cycle time by 70% management was impressed and the company will reap the rewards for years to come across all platforms of machining.
Damian | CEI
Aerospace | Sacramento CA
Volumill has revolutionized our metal removal methods when machining Titanium. We use the Siemens NX with the Volumill plug-in to program difficult to machine materials obtaining higher metal removal rates than traditional Siemens NX cutter paths. Tool life will be dramatically increased due to the reduced load and heat on the cutter. The cost of the software can easily be offset by the increase in machining efficiency and the reduction in tooling costs.
Chuck Shannon | General Tool Company
Job Shop Manufacturing | Cincinnati, OH
VoluMill increases the efficiency of rough milling. We are pleased with the performance increase.
Stefan Holthaus | Amazonen-Werke GmbH&Co.KG
Agriculture Machines | Germany
Volumill toolpath is the best strategy for roughing compare to any other high speed or high performance toolpaths.
Alagesh Nanjappan | Zimmer
Medical device | Warsaw, IN
Volumill works great. Appreciate your support and help.
Sasikumar Aththiyappan | Tech Mahindra
Sofware and Engineering services Industry | Bangalore,India
We are using this VoluMill as an add-on to Siemens NX CAD/CAM processing software. Advance toolpath calculation is taking time, the algorithm could be more effective, but the output is reliable and superior. It's one of the best-in-class roughing method to run, generating huge time savings and extending tool life. Especially when it comes to machining of hard materials, nickel alloys, titanium alloys and the other material with low machinability.
Jarek Cieslak | Hydromechanika
Manufacturing | Polska / Poland
Best bang-for-your-buck productivity enhancement that we've seen. It allows us to significantly boost material removal rates while simultaneously making more effective use of our cutting tools, with no modification to our existing equipment.
Doug Shupps | AFC Tool
Aerospace, automotive, progressive dies, special machines | Dayton Ohio
We love VoluMill here at Metalmite Corporation thanks to Greatlakes CAM
Tom G. | Metalmite Corporation
Job Shop | Rochester, MI